Concrete Finisher

Concrete Finisher

Basic Scope/Purpose:

Smooths and finishes surfaces of poured concrete structures, using hand tools or power tools including floats, trowels, and screeds. Operate Skid steer, backhoes and mini excavators.

Essential Functions/Duties:

  • Spreads concrete to specified depth and workable consistency, using float to bring water to surface and produce soft topping.
  • Levels, smooths, and shapes surfaces of freshly poured concrete, using straightedge and float or power screed.
  • Finishes concrete surfaces, using power trowel, or wets and rubs concrete with abrasive stone to impart finish.
  • Removes rough or defective spots from concrete surfaces, using power grinder or chisel and hammer, and patches holes with fresh concrete or epoxy compound.
  • Molds expansion joints and edges, using edging tools, jointers, and straightedge.
  • Produce rough concrete surface, using broom.
  • Mix cement, using hoe or concrete-mixing machine.
  • Direct sub grade work, mixing of concrete, and setting of forms.
  • Follow set procedures and standards.
  • Rate information using standards that can be measured or checked.
  • Detect, recognize and respond to dangerous conditions or situations.
  • Regular attendance is required.
  • Significant travel required.
  • Performs other duties as required.
  • Tie rebar
  • Set forms
  • Operate skid steer, backhoe and mini excavators.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.

Working Conditions/Physical Effort:
Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as, confined spaces. Must be able to effectively use all required PPE equipment and lift up to fifty pounds. Strenuous physical demands are required to safely perform the essential functions associated with this position. Must be able to safely operate all involved equipment and tools. Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats, and working in awkward body positions.

*Nothing in this job description restricts the Company’s right to assign or reassign duties and responsibilities to this job at any time.

Job Type: Full-time

Experience:

  • Concrete Finisher: 3 years (Required)
  • Concrete: 5 years (Required)
  • Concrete Finishing: 3 years (Required)
Posted
11/06/2021
Salary Range
$33,000.00 - 45,000.00
per Year
Salary range estimated by
Location
Raleigh-Durham, NC, US
Apply Now